Load Bearing: 20 Tons
Warranty: 12 Months
Body material: Heavy duty casting aluminum
Power supply: Solar panel(monocrystalline 2.5V/0.2W)
Visual distance: ＞ 800m
Working Mode: Flashing or Constant
Waterproof: IP68
Solar Pavement Marker Light Features:
•High shock resistance, energy-saving, environment friendly.
•Automatically starts to work when night falls or with the onset of inclement weather.
•These aluminum alloy Solar Pavement Marker Light are naturally charged by the sun.
•The LED lights of the Solar Pavement Marker Light come on automatically as soon as it starts getting dark every night.
•effective, Solar Pavement Marker Light is easy to install and requires absolutely no wires or maintenance.
•Dramatically enhances the look of your garden/yard/driveway.
•Specifically designed with road safety in mind and can help to prevent serious accidents and emit rather than reflect light.
•Accept OEM/ODM
Solar Pavement Marker Light Parameters:
| Material: | Heavy-duty casting aluminium+PC |
| Power supply: | Solar panel(monocrystalline 2.5V/0.2W) |
| Battery: | NI-MH 1.2V/600MAHor lithium battery |
| Working model: | Blinking or Constant Charging in the daytime and working automatically at night |
| LED: | Diameter 5mm; 6pcs in Total |
| LED colors: | Yellow, White, Red, Green, Blue |
| Life span: | 3 years |
| Resistance: | >20T(static) |
| Size: | L124*W43*H29mm (L4.88″*W1.69″*H1.14″) |
| Visual distance: | >800M |
| Water proof: | IP68 |
| Carton Size: | 2pcs/box;100pcs/ctn; Weight:26kg; Carton size:48*27*21.5cm (2pcs/box;100pcs/ctn; Weight:57.32bs; Carton size:18.90″*10.63″*8.46″) |
Application of Solar Pavement Marker Light:
♥Schools and hospitals
♥Gardens
♥Deck and Dock
♥Walking paths
♥Bridge
♥Parks and campuses
♥Roundabout
Installation Method Of Solar Pavement Marker Light M1:
1. Determine the installation location and distance, clean the road surface, and ensure that the Solar Pavement Marker Light are installed on a flat road surface.
2. Clean the bottom of the Solar Pavement Marker Light and apply the epoxy glue evenly to the back of the studs.
3. Press the side with the glue on the road, fix the position, wait for the glue to dry.
4. Check within 2 hours of installation to ensure that all Solar Pavement Marker Light is not installed incorrectly and are not bent or deformed due to compression.
5. Remove the installation isolation facility within 6-8 hours after the installation of the Solar Pavement Marker Light.
