Home » Products » 360 Degree PC Solar Pavement Marker Light B2
360 Degree PC Solar Pavement Marker Light B2
Load Bearing: >20T(static)
Warranty: 12 Months
Body material: Anti-UV PC
Power supply: Solar panel(monocrystalline 2.5V/0.2W)
Visual distance: > 800m
Working Mode: Flashing or Constant
Waterproof: IP68
Type: Embedded type
Installation Method Of PC Solar Pavement Marker Light:
Carefully mark the distance between the placement of Solar Pavement Marker Light. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill Φ108mm and depth will be 50mm.
Remove all debris from the installation hole.
Pour epoxy into the holes per the manufacturer’s instruction.
Verify that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the plastic Solar Pavement Marker Light shaft.
Set the lighting surface of the Solar Pavement Marker Light to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and Solar Pavement Marker Light shaft.
After curing the LED Solar Pavement Marker Light for 6-8 hours, remove the installation of the isolation facility.